Bathroom Remodeling, Tub-to-Shower Conversions and Walk-In Showers in Gatlinburg, TN

A shower-only project may be appropriate when the existing vanity, flooring, lighting and other bathroom features still work well. A broader bathroom remodel makes more sense when several parts of the room are worn, poorly coordinated or no longer fit the way the bathroom is used. During the consultation, we separate the necessary wet-area work from surrounding improvements that may be included or left optional.

A tub-to-shower conversion begins with a bathtub. The tub is removed and its footprint is rebuilt as a shower with a lower entrance, new base, waterproof walls, fixtures, storage and glass. A shower replacement begins with an existing shower. The old unit is removed and replaced with a complete new shower system.

Remove it only when the tub is rarely used, occupies too much of the bathroom or makes the wet area difficult to enter and maintain. A larger walk-in shower may provide more useful standing room and easier routine care, but no single choice guarantees better bookings or resale value. Consider the property’s likely users, number of bathrooms and whether another bathtub remains before deciding.

Keeping one bathtub can be useful for households or guest groups that include young children or people who prefer bathing. If the property has multiple bathrooms, one tub may be retained while a difficult or underused tub in another bathroom is converted to a shower. The right answer depends on the property and its expected users.

Yes. A worn, yellowed, scratched or cramped fiberglass unit can be removed and replaced with a new base, waterproof wall system, fixtures, storage and enclosure. This is a complete shower replacement, not a liner or cosmetic coating placed over the existing unit.

A low-entry shower has a reduced threshold but still uses a defined shower base. A curbless shower creates a more continuous transition from the bathroom floor into the wet area. Curbless construction depends on the floor structure, drainage and available space, so it must be evaluated at the property before it can be recommended.

FIBO is a substantial waterproof panel system with locking connections and MS polymer-sealed joints. Unlike a molded acrylic surround, it is available in a broad range of marble, stone, slate, subway-look, wood-look and contemporary designs. Unlike tile, the finished surface has no cement-based grout lines to clean or reseal. Read the detailed FIBO, acrylic and tile comparison.

FIBO panel surfaces carry antibacterial certification. That is a tested property of the finished panel surface; it is not a medical claim and does not eliminate normal bathroom cleaning. The grout-free face also removes cement-based grout lines from the shower’s routine cleaning requirements.

Use a soft cloth or non-abrasive sponge with a suitable mild bathroom cleaner, then rinse the surface as needed. Avoid abrasive pads, harsh scouring products and tools that can damage the finish. Glass, fixtures and the shower base should be cleaned according to their respective manufacturers’ instructions.

Moisture-resistant luxury vinyl plank or luxury vinyl tile can be a practical choice when straightforward care and some flexibility are priorities. Ceramic or porcelain flooring may also be appropriate when the subfloor and installation conditions support it. We can coordinate suitable flooring with a broader bathroom-remodeling scope, but we do not install tile shower systems.

Upgrade them when they improve lighting, visibility or the owner’s intended design—not because anyone can guarantee additional bookings. Good task lighting, a properly sized mirror, useful outlets and effective ventilation generally have more dependable practical value than adding technology solely for a listing photograph.

A double vanity can help when several people regularly prepare at the same time and the room has enough width, storage and plumbing capacity. A well-planned single vanity may be the better choice when adding a second sink would reduce counter space, circulation or useful storage. We measure the room before recommending either layout.

Yes, when suitable access and communication arrangements can be established. We document measurements and product selections, define the proposed scope in writing and discuss who can provide access, receive updates and participate in the final walkthrough. The exact arrangement depends on the property and project; we do not assume every remodel can be managed entirely remotely.

Most standard tub-to-shower conversions take about two working days once installation begins. Larger showers, extensive preparation, custom glass, broader bathroom work or conditions discovered after removal can affect the schedule. The expected construction time is discussed after the bathroom is measured and the scope is defined.

Our employee installers complete the project; the installation is not handed to an unknown subcontracting crew. We protect travel paths, organize the work area, communicate during installation, clean at the end of each workday and complete a final cleaning and walkthrough. Learn more about the difference between a local bathroom remodeler and a one-day bath franchise.

A simple builder-grade shower replacement can begin around $7,500. PanelPro waterproof shower systems commonly range from approximately $9,000 to $11,000, while custom FIBO shower packages commonly range from approximately $11,000 to $15,000. These are planning ranges, not fixed quotes. Size, preparation, base, fixtures, storage, glass and surrounding bathroom work affect the final proposal.

The proposal should identify the work being performed, selected products, removal and preparation, fixtures, storage, glass, surrounding bathroom work, price and payment schedule. It should also distinguish fixed costs from allowances and explain how changes will be approved before additional work proceeds.

Most of our defined shower and bathroom work is quoted at a fixed price. Custom glass, vanities, undermount sinks and vanity tops may use realistic allowances when the final product or field measurement is not yet available. Any allowance is identified in the written proposal rather than hidden inside a general estimate.

Tennessee guidance states that a home-improvement contractor generally may not request a deposit of more than one-third of the total contract price before work begins. The written agreement should also explain the remaining payment schedule. Review current guidance from the Tennessee Department of Commerce and Insurance before signing a home-improvement contract.

Financing is available for qualified homeowners. Available terms depend on approval and the selected project. Financing does not change the need to measure the bathroom, choose suitable products and define the proposed scope before work is scheduled.

Call (865) 247-5504 or submit the consultation form. An experienced project manager will visit the property, measure the bathroom, discuss how it is used, compare suitable options and prepare a written proposal for the selected scope. The consultation is intended to give you enough information to make a clear decision without a high-pressure presentation.